TY - JOUR T1 - Comparing the retention of two different designs of resin bonded restorations TT - بررسی مقایسه‌ای گیر دو طرح متفاوت پروتزهای باندشونده با رزین JF - JIDA JO - JIDA VL - 22 IS - 4 UR - http://jida.ir/article-1-814-en.html Y1 - 2010 SP - 233 EP - 239 KW - Dental Prosthesis Retention KW - Dental Prosthesis KW - Denture KW - Fixed KW - Resin-Bonded KW - Resin Cement KW - Tooth Preparation KW - Prosthodontic. N2 -   Comparing the retention of two different designs of resin bonded restorations     Dr. Bajoghli F .,1 Dr. Nosouhian S .,1 Dr. Seyedmozafare M .2   1 Assistant Professor, Department of P rosthodontics , School of Dentistry, Isfahan University of Medical Sciences. Isfahan , Iran. 2 Dentist.     (Received 18 Feb, 2010 Accepted 24 Oct, 2010)   Abstract     Background and Aim : Prosthesis design has an important effect on its retention, especially in Resin Bonded Restorations (RBRs) in which preparation is conservative since there are different design possibilities to fabricate RBRs. The aim of this study was to compare the retention of RBRs with two different designs .   Materials and Methods : In this experimental study, twenty-two RBRs were fabricated from twenty-two premolar and second molar teeth which had the same size and no carries. In the first group, conventional preparation which included lingual preparation, guiding planes, occlusal rests and two grooves in interproximal areas, was perfomed. In the second group, preparation included only class II inlay cavity preparation on the edentulous side. After frame work fabrication, the samples were cemented with resin cement (Panavia F), and subjected to tensile force. The force required to separate each sample was recorded and the results in the two groups were compared by t test.   Results : Average retention in the group with conventional design was 39.523 ± 8.62 kgf and 25.715 ± 4.10 kgf in the group with modified design. The difference was shown significant by the statistical t test (P M3 ER -